| |
 |
Step 1
For an accurate print firstly plan your design on a piece
of paper, remembering that the printed image will be a
mirror image of the printing block. Keep the components
of the design in close proximity to minimize ink being
rolled onto the backing card.
A border will help define
the edges of the print. Trace over the design with a ball
point pen to impress the image onto the backing card.
This will give clear guide lines for mounting the cut
design. Cut out the design and glue
the pieces into place.
|
| |
 |
Step
2
Use a smooth, flat sheet of plastic or metal (an old baking
tray will do) or a lino
tile as an ink bed. Place a small dot of water
based printing ink onto the bed and roll it out thinly
and evenly.
[Back to Block
Printing Ink] |
| |
 |
Step
3
The roller
will now have a thin, even layer of ink on it ready
to roll onto the printing block. Use a smooth forward
and backward action to cover the block. (If some ink
is transferred to the backing card simply tear a small
piece of newsprint
and mask this area to prevent the unwanted ink from
being printed.) |
| |
 |
Step
4
Place a sheet of paper on the inked block taking care
not to move it and firmly roll over the back of it with
a clean roller. Alternately burnish with the back of a
spoon or the heel of your hand. Before peeling the paper
away, lift one corner to ensure the design has been transferred
and no areas missed.
[Back to Block
Printing Ink] |
| |
 |
Step 5
Carefully peel the paper away to reveal your print. |
| |
 |
As
an alternative:
For a more colourful print try rolling more than one colour
onto the block, overprint with a second colour, print
onto coloured paper or prepare your own coloured paper
by sponging the surface with contrasting paints.
[Back to Block
Printing Ink] |
